BP 12 Electric Pump Inflatables SUP

Electric pump for inflating inflatable SUP boards.

The Scoprega BP 12 offers a clever and effortless solution for inflating your inflatable SUPs.

You can set your preferred pressure level, and the pump will automatically halt once this is achieved. The maximum pressure is 14.5PSI (1 bar), with a 12V DC voltage supply and air flow rate of 42.27 gallons (160 litres) per minute.

It includes a valve connector compatible with inflatable SUPs and a bag with a shoulder strap.

This pump is equipped with a 1.7-metre (5.58 feet) tube and a 3-metre (9.84 feet) power cable.

It is also suitable for inflatable boats and kites.

Instructions:

• Attach the pump using the two crocodile clips to a 12Volt battery - NOTE: A 12V accessory socket plug (Car Cigarette Lighter plug) is not included in this pump kit because the pump is too powerful for connection through that socket.
• Securely fit the correct valve-connector to the tube
• Attach to the SUP, kite, or boat valve
• Adjust the BP 12 Electric to the appropriate air pressure level for the item you wish to inflate
• Press the start button
• The pump will stop automatically when the desired air pressure level is attained

Measurements:

• 20.5cm x 10.5cm x 13cm