Guide to Fitting BMX Cranks

Discover how to fit your BMX cranks by following the straightforward steps in our video:

1. Begin by applying grease to the crank's spindle before inserting it into the bottom bracket.
2. Use a rubber mallet to tap it securely into place.
3. Fit the bearing cover and apply grease to the visible section of the spindle.
4. Check the distance between the crank and your frame; if necessary, add a spacer for adjustment.
5. Slide the crank on and tighten it with a greased bolt.
6. Now you can fit the other bearing cover.
7. Take the sprocket-equipped crank and ensure it is aligned properly with the initial crank.
8. Once again, secure everything tightly with a greased bolt.

The installation of your cranks is now complete!