Guide to Fitting Skateboard Bearings

Every skater, whether dealing with a fresh set or reinserting them after cleaning, will at some point need to fit skateboard bearings. Luckily, this is a straightforward task requiring only a skate tool. Our concise video demonstrates how to perform this effortlessly:

1. Begin by taking off the nut from the truck. If the nut is jammed, utilise a skate tool.
2. Next, remove the speed ring.
3. Place one bearing onto the truck, followed by the wheel.
4. Line up the wheel with the bearing and press down using both hands.
5. Take off the wheel and replicate the same procedure on the opposite side.

Your bearings are now fitted!